Gonzalo Omar Pincheira Orellana

Director de Departamento
Departamento Tecnologías Industriales

gpincheira@utalca.cl
Teléfono

+56 75 2201738

Áreas de Investigación

Me he desarrollado principalmente en el estudio y caracterización de materiales poliméricos de distintas naturaleza, polimeros de impresión 3D, polímeros reciclados, reforzados con fibras de vidrio y carbono, biopolímeros, etc. Adicionalmente, durante los últimos años he comenzado el estudio de estructuras bio-inspiradas  y con comportamiento ortotrópico diseñable según los requerimiento de las aplicaciones. Dentro de mis áreas principales de estudio están:

1. Caracterización de propiedades mecánicas

2. Desarrollo de polímeros y polímeros reforzados

3. Estudio de estructuras bio-inspiradas y manufactura aditiva

Biografía

Ingeniero Civil Mecánico de la Universidad de Concepción, Chile, 2010.

Doctor en Ciencia e Ingeniería de los Materiales en UdeC, Chile, 2016.

 

Publicaciones WoS - Scopus 

2021

Rodrigo Valle, Gonzalo Pincheira, Victor Tuninetti. “Design of an auxetic celular strucutre with different elastic properties in its three orthogonal directions”. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. DOI: 10.1177/14644207211010209.

Pesante, K. Saavedra, G. Pincheira. “Mechanical properties of a Wood flour-pet composite through computational homogenisation”. Computers, Materials & Continua, vol 67 (3), pp 4061-4079, 2021.

D. Gormaz, G. Pincheira, C. Galarce. “Module proposal in mechanical engineering base don Project based learning” ICL 2020: Educating Engineering  for Future Industrial Revolutions pp349-361, part of the Advances in Intelligent Systems and Computing (AISC, volume 1328). Conference paper

Angle, L. Silvestre, G. Pincheira, C. Galarce, D. Gormaz. “Improving the teaching-learning process in engineering through a game-based web support system: Edutrivias” ICL 2020: Educating Engineering  for Future Industrial Revolutions pp487-498, part of the Advances in Intelligent Systems and Computing (AISC, volume 1328). Conference paper

 

2020

Victor Tuninetti, Paulo Flores, Marian Valenzuela, Gonzalo Pincheira, Carlos Medina, Laurent Duchene, Anne-Marie Habraken. “Experimental characterization of the compressive mechanical behaviour of Ti6Al4V alloy at constant strain rates over the full elastoplastic range”. International Journal of Material Forming. 2020, accepted. 

Pesante, P., Saavedra, K., Pincheira, G., Hinojosa, J., Retamal, C. “Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems”, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018, 2020, pp. 2326-2336. Conference paper

 

2019

Victor Tuninetti, Gaetan Gilles, Paulo Flores, Gonzalo Pincheira, Laurent Duchene, Anne-Marie Habraken. 2019. “Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6A14V alloy”. Meccanica. Publicada. ISSN: 0025-6455 (Print) 1572-9648 (Online).

Dominguez-Santos,D.; Mora-Melia, D.; Pincheira-Orellana, G.; Ballesteros-Pérez, P.; Retamal-Bravo, C. 2019. “Mechanical properties and seismic performance of wood-concrete composite blocks for building construction”. Materials. Publicada. ISSN 1996-1944.

Renzo Angles, Luis Silvestre, Gonzalo Pincheira. “Edutrivias: Web support system based on trivia for the teaching-learning process”. Proceedings - International Conference of the Chilean Computer Science Society (SCCC). DOI: 10.1109/SCCC49216.2019.8966392

 

2018

G. Pincheira, N. Ferrada, J. Hinojosa, G. Montecino, L. Torres, K. Saavedra. 2018. “A study of interlaminar properties for a unidirectional glass fiber reinforced epoxy composite”. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Publicada. ISSN: 1464-4207
Online ISSN: 2041-3076.

J. Hinojosa, K. Saavedra, G. Pincheira. 2018. “Parallelization using a BDD-C of a multiscale strategy with non lineal localization based on a NKS”. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería. Publicada. ISSN: 1886-158 X.

 

2016

Pincheira, G., Montalba, C., Aguayo A., Gacitua, W., Montrieux, H.M., Lecomte-Beckers, J., Meléndrez M., Flores, P. 2016. “Study of effect of amino-functionalized multiwall carbon nanotubes on dry sliding wear resistance properties of carbon fiber reinforced thermoset polymers”. Publicada.  Polymer Bulletin. ISSN: 0170-0839 (Print) 1436-2449 (Online).

San Juan V., Fernandez E., Pincheira G., Meléndrez M., Flores P. 2016. “Evaluation of the fill yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass fiber reinforced epoxy composite”. Publicada. Composite Structures. ISSN: 0263-8223.

 

2015 - posteriores

Pincheira, G., Canales, C., Medina, C., Fernández, E., Flores, P. 2015. “Influence of aramid fibers on the mechanical behavior of a hybrid carbon-aramid reinforced epoxy composite”. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Publicada. ISSN: 1464-4207. Online ISSN: 2041-3076.

Fernández. C., Medina. C., Pincheira. G., Canales. C., Flores. P., “The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy glass fiber reinforced composites”. Composite Part B. Engineering, volume 55, 421-425. 

 

 Participación en Proyectos 

  1. Investigador Pricipal Fondecyt de Iniciación 11160633: A study on the influence of interlaminar properties on the out-of-plane mechanical behavior of a nano-composite material.  2016-2019
  2. Director FIC-R, BIP 30.481.945: Valorización de desechos reciclables a través de la creación de nuevos materiales para la fabricación de productos comercializables. 2017-2019
  3. Ingeniero de Fondef  IdeA IT13i10054 Dr. Paulo flores: Evaluación del desempeño en línea productiva de rodillos de roll forming hechos de un polímero reforzado con fibras y nanotubos de carbono. 2013-2015
  4. Ingeniero Fondef D08I1138 Dr.Paulo Flores: Proyecto: Desarrollo de polímeros termoestables reforzados con fibras y nanopartículas para aplicaciones de alto desempeño. 2010-2013.

Publicaciones

Proyectos

No hay proyectos para mostrar

Documentos

Documentos Adjuntos

- No hay resultados para mostrar -